PHILIPS 20FT3010/37B
Manual de Usuario

DFU

20FT3010/37

050404.0944

PRELIMINARY

IFACE / HIFACE ITV Setup Menu Item Descriptions
LANGUAGE SETUP x CONSUMER x FEATURES MENU_ An on-screen LANGUAGE option is available. You can set the TV's on-screen menu to appear in English, French, or Spanish text. With the Main Menu on-screen. press the Menu button repeatedly, or use the Cursor Up and Down buttons, to select LANGUAGE with the TV�s highlight control bar. Press Cursor Right (+>) or Left (<- ) on the remote to select English, French (FRANCAIS), or Spanish (ESPANOL). Text in the on-screen Menu will appear in the selected language. ________________________________________________________________________________________________ CHANNEL INSTALL SETUP x CONSUMER x FEATURES MENU_ When CHANNEL INSTALL is highlighted, use Channel Up/Down, or enter the desired channel number using the Number buttons you wish to edit. The following control items, contained within the Channel Installation menu, will affect the chosen channel. CHANNEL - When CHANNEL is selected, use Channel Up/Down, or enter the desired channel number using the Number buttons.
CHANNEL CHANNEL RING 1 CHANNEL RING 2 CHANNEL RING 3 CHANNEL RING 4 INPUT LABEL AUTO PROGRAM* EXIT CHANNEL INSTALLATION AV1 / AV1YC / AV2 / AV2YC / CVI / TV 1-125 SAVED / DELETED SAVED / DELETED SAVED / DELETED SAVED / DELETED AV1 / AV1YC / AV2 / AV2YC / CVI / TV 1-125 (--------) > >

*NOT AVAILABLE ON HCIFACE 0.07 / HIFACE 1.0 Note: Inputs in italics appear in the menu, but are not implemented. · AV1 refers to the CVBS input on the 20FT3010 jack panel. · AV1YC, AV2, and AV2YC appear in the menu but are not implemented. · A �channel� can be either an RF channel (1-125) or a video input (AV1, CVI). RF channels (1 - 125) can select ANTENNA (normal mode), or be re-directed to (i.e. used to select) a video input. In other words, Channel 3 could select AV1, Channel 4 could select CVI, etc. This re-direction is sometimes referred to as channel mapping. However, video inputs can select only a video input (AV1 / CVI). Video inputs cannot be mapped to ANTENNA. · Note: The screen will blank momentarily, and there will be a short delay, when you step through the CHANNEL and INPUT selections. CHANNEL RING 1-4 CHANNEL RING determines the channels or inputs that are accessible by means of the television�s keyboard (if it is not locked out) or from a guest-mode remote control. When CHANNEL RING 1, 2, 3, or 4 is highlighted, press the Cursor Right (+>) or Left (<- ) buttons on the remote to choose SAVED or DELETED. When SAVED is selected, the channel will remain in, or be added to, the respective channel ring. When DELETED is selected, the channel will be removed from the respective channel ring and will not appear when TV channels are scanned (using the Channel +,- buttons). Each of the four channel rings can be programmed individually, but only one channel ring can be in effect at any given time. The channel ring that is currently in effect is specified in the setup menu CURRENT RING item (see CURRENT RING). INPUT - When INPUT is highlighted, press the Cursor Right (+>) or Left (<- ) buttons on the remote to select ANTENNA, FRONT, AUX, S-VIDEO input signal options. INPUT directs the TV to select the specific indicated input whenever this channel is tuned. See CHANNEL, above. LABEL - When LABEL is highlighted, press the Cursor Right (+>) button on the remote to select the first character space area. Then press the Cursor Up and Down buttons to scroll through the list of available letter characters/numbers/& symbols provided for your labeling use. Press the Cursor Right (+>) button to highlight the next character space and continue to repeat the process until the complete label or channel title has been entered. The Channel Label will appear in the corner of the TV screen beside the selected channel number. AUTO PROGRAM - When AUTO PROGRAM is highlighted, press the Cursor Right (+>) or Left (<- ) buttons to begin an automatic channel search for all available received signal programs. Any channels found will be SAVED in the TV�s program memory. NOTE: The AUTO PROGRAM feature is not available in HCIFACE 0.07 / HIFACE 1.0.
10