PHILIPS 17B2302Q13
Manual de Usuario

How to Use the On Screen Display (OSD)
Size & Position window

Horizontal Size
HORIZONTAL SIZE expands or contracts the image on your screen, pushing it out toward the left and right sides or pulling it in toward the center.

Vertical Position Vertical Size
VERTICAL POSITION adjusts the image on your screen either up or down. Use this feature if your image does not appear centered. VERTICAL SIZE expands or contracts the image on your screen, pushing it out toward the top and bottom of pulling it in toward the center.

1

Press the ON SCREEN DISPLAY button.

1

Press the ON SCREEN DISPLAY button.

2

Turn the ROTARY knob until SIZE & POSITION window is highlighted. Next, press the ON SCREEN DISPLAY button. Then, turn the ROTARY knob until HORIZONTAL SIZE is highlighted.

2

Turn the ROTARY knob until SIZE & POSITION window is highlighted. Next, press the ON SCREEN DISPLAY button. Then, turn the ROTARY knob until VERTICAL POSITION or VERTICAL SIZE is highlighted.

Press the ON SCREEN DISPLAY button to add your change and return to the Main Menu. Press again to exit. See below for other options.

6

Press the ON SCREEN DISPLAY button to add your change and return to the Main Menu. Press again to exit. See below for other options.

6

3

Press the ON SCREEN DISPLAY button to bring up the HORIZONTAL SIZE screen.

3

Press the ON SCREEN DISPLAY button to bring up the VERTICAL POSITION or VERTICAL SIZE screen.

5

When you are done, press the ON SCREEN DISPLAY button.

4

Turn the ROTARY knob to adjust the horizontal size. Note: the screen expands or contracts as you turn the ROTARY knob.

5

When you are done, press the ON SCREEN DISPLAY button.

4

Turn the ROTARY knob until the image is vertically balanced or the vertical size you want.

Smart Help
To make other changes in the SIZE & POSITION window . . . . . . after returning to the SIZE & POSITION window [but before press the On Screen Display (OSD) button in step 6], turn the ROTARY knob until another feature � for example, VERTICAL POSITION � is highlighted. Next, follow steps 2 - 6 under VERTICAL POSITION. . . . after you have exited completely, press the OSD button and follow the steps under that feature, for example, VERTICAL POSITION.

Smart Help
To make other changes in the Main Menu . . . . . . after returning to the Main Menu [but before press the On Screen Display (OSD) button a second time in step 6], turn the ROTARY knob until another feature is highlighted. Next, turn to the page for that feature and follow the steps. . . . after you have exited completely, press the OSD button and follow the steps under that feature.

14