Picture interference
When the picture quality is poor when you play a cassette, please follow these instructions.
Cleaning the video heads
If horizontal lines appear on the screen when you play a cassette, you should clean the video heads.
Tracking during playback
a During playback, press the MENU button. b Select the line �Tape� with the menu buttons AP q or
P rB
and confirm with the
qSC
button.
c Select the line �Tracking� with the menu buttons
AP q
or
P rB
.
d Hold the menu buttons DSr or qSC until the
playback quality is at its best.
e Confirm with the OK button. f To end, press the MENU button. This setting will remain
a During playback, press the MENU button. b Select the line �Tape� with the menu buttons AP q or
P rB
and confirm with the
qSC
button.
until you remove the cassette.
c Select the line �Cleaning� with the menu buttons
AP q
Tracking during still picture
If the still picture vibrates vertically, you can improve the still picture as follows:
a During still picture, press the MENU button. b Select the line �Tape� with the AP q button or
P rB
or
P rB
.
d Press the OK button. �CLEANING� appears on the
screen.
e Wait a few seconds, until the message disappears and
then press the
MENU
button.
and confirm with the
qSC
button.
c Select the line �Jitter� with the AP q or P rB
button.
d Hold the DSr or qSC button until the picture
quality is at its best.
e Confirm with the OK button. f To end, press the MENU button.
D Please note, however, that interference may still occur with poor quality cassettes.
