|
No hay comentarios de productos.
Manual TV channel search
In certain cases the �Automatic TV channel search� may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
h Press the OK button to store the changes you have
made.
i If you want to change the automatic tv channel setting,
menu will appear.
b Select the line �Installation� with the AP q or
P rB
select the line �Fine tuning�. With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
j Press the OK button to store the TV channel.
button and confirm with the
SqC
button.
c Select the line �Manual store� with the AP q or
P rB
D If you want to search for further TV channels, start again at step e.
k To end, press the MENU button.
button and confirm with the
SqC
button.
MANUAL STORE
Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT.1 . To do this, select the channel number �E1� with the P pAB button. You will have to select the channels to be received by the satellite receiver on the receiver itself.
Channel/Frequency FREQU. Search 125 Fine tuning (,,,,,,n=,,,,,,$ Name edit xxx Programme number 01 Decoder OFF
ã Exit: « press MENU
d In the line �Channel/Frequency�, select the
display for: �FREQU.�: frequency �C CH�: channel �S CH�: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line �Search� with the digit buttons 0-9 . D If you don�t know the frequency or channel of the TV channel of your choice, press the SqC button to start the channel search.
f In the line �Programme number� select the
programme number you want e.g.: �01�, using the DSr or SqC button.
g If you want to change the TV channel name, press the
SqC
button in line �Name
edit�.
E Select the number or letter you want to change with the DSr or the SqC button. Change it with the AP q or the P rB button. Select the next number or letter in the same way.
6
|
