PHILIPS 14PV284/05
Manual de Usuario

Programming with �VIDEOPlus+�
All the information required for programming is encoded in the �VIDEOPlus+� code.
1 Press the
SV/V+

How to enter, check or clear a TIMER block manually
1 Press the
TIMER k

button.

button on the remote control.

2 Select a free TIMER block or the TIMER block you want

2 Enter the entire �VIDEOPlus+ code�. This code (up to 9

to check or clear.
3 Clear: Press the
CLEAR

digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with the CLEAR button.

button.
D

4 Enter/Check: Press the

or C button to switch between �DATE� (date), �DW� (daily, weekly), �PR� (programme number), �START� (start time) and �END� (end time). A B 0-9 Press the and the , or the buttons to change the data.

VIDEOPLUS CODE DAILY/WEEKLY PROGRAMME NR.

ONCE 01

5 To end programming, press the
OK

MENU

button.

x y 0-9

6 Press the

STANDBY m

button.

3 If you want to repeat programming at daily or weekly

Important notes for programmed recordings
� If the message �PLEASE PRESS STOP� or �PLEASE PRESS STANDBY� appears on the TV screen, press the STOP h or the STANDBY m button. A TIMER recording will function only, if the set isn�t used for other video recorder functions (e.g.: playback). The TIMER lamp on the front of the set lights up when one or more of the TIMER blocks are occupied. If the end of the cassette is reached during a recording, the video recorder automatically ejects the cassette. The set switches off after a few minutes. If you forget to load a cassette, �NO CASSETTE CANNOT RECORD� will appear. If you inserted a cassette with erase protection when you want to start a recording, the cassette will be ejected. If �CODE ERROR� appears on the TV screen, you entered an incorrect code number or the incorrect date. Repeat the entry or end with the STANDBY m button. With �Daily� programming, the first recording must take place within a week. If �DAILY ERROR� appears on the TV screen, the date was incorrectly entered. �Daily� programming can only be used for recordings to be made from Mondays to Fridays inclusive. The programmed recording will always be made at the recording speed (SP/LP) that has already been selected on the TV Combi.

intervals, select the required setting in the �DAILY/WEEKLY� line. �Daily� programming can only be used for recordings to be made from Mondays to Fridays inclusive.
4 After the confirmation the corresponding data appears on

the TV screen. Note: If you use �VIDEOPlus+� for the first time, the �PROGRAMME NR.� line appears when you enter the �VIDEOPlus+� code. Enter the required programme number for this TV channel.

� �

� �

DATE DW PR START END 01 01 17:15 18:45

d

�

v w x y 0-9

OK

�
5 Confirm with the
OK

button. �

The data has been stored in a TIMER block. Please ensure that you loaded a cassette without erase protection.

7