PHILIPS 14PV274/05
Manual de Usuario

Programming with �VIDEOPlus+�
All the information required for programming is contained encoded in the �VIDEOPlus+� code.
1 Press the
SV/V+

How to enter, check or clear a TIMER block manually
1 Press the
TIMER k

button.

button on the remote control.
2 Select a free TIMER block or the TIMER block you want

2 Enter the entire �VIDEOPlus+ code�. This code (up to 9

to check or clear.
3 Clear: Press the
CLEAR b D

digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with the CLEAR b button.

button. or
C

4 Enter/Check: Press the

button to switch

VIDEOPLUS CODE DAILY/WEEKLY PROGRAMME NR.

ONCE 01

between �DATE� (date), �DW� (daily, weekly), �PR� (programme number), �START� (start time) and �END� (end time). Press the A and the B or the 0-9 buttons to change the data.
5 To end programming, press the
MENU

button.

x y 0-9

OK

6 Press the 3 If you want to repeat programming at daily or weekly

STANDBY m

button.

intervals, select the required setting in the �DAILY/WEEKLY� line. �Daily� programming can only be used for recordings to be made from Mondays to Fridays inclusive.
4 After the confirmation the corresponding data appear on

Important notes for programmed recordings
� If the message �PLEASE PRESS STOP� or �PLEASE PRESS STANDBY� appears on the TV screen, press the STOP h or the STANDBY m button. A TIMER recording will only function, if the set isn�t used for other videorecorder functions (e.g. playback). The TIMER lamp on the front of the set lights up when one or more of the TIMER blocks are occupied. If the end of the cassette is reached during a recording, the video recorder automatically ejects the cassette. The set switches off after a few minutes. If you forget to load a cassette, �NO CASSETTE CANNOT RECORD� will appear. If you inserted a cassette with erase protection when you want to start a recording, the cassette will be ejected. If �CODE ERROR� appears on the TV screen, you entered an incorrect code number or the incorrect date. Repeat the entry or end with the STANDBY m button. With �Daily� programming, the first recording must take place within a week. If �DAILY ERROR� appears on the TV screen, the date was incorrectly entered. �Daily� programming can only be used for recordings to be made from Mondays to Fridays inclusive. The programmed recording will always be made at the recording speed (SP/LP) that has already been selected on the TV Combi.

the TV screen. Note: If you use �VIDEOPlus+� for the first time, the �PROGRAMME NR.� line appears when you enter the �VIDEOPlus+� code. Enter the required programme number for this TV channel. � �

�
DATE DW PR START END 01 01 17:15 18:45 d

� �

v w x y 0-9

OK

5 Confirm with the

OK

button.

�

The data has been stored in a TIMER block. Please ensure that you loaded a cassette without erase protection.
6 Press the
STANDBY m

�

button.

7