Manual TV channel search
In certain cases the �Automatic TV channel search� may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT .
a To do this, select the channel number �E1� using the
menu will appear.
b Select the line �MANUAL SEARCH� with the =P r or
;P q
button 0 on the remote control. You will have to select the channels to be received by the satellite receiver on the receiver itself.
b Use the number buttons 0..9 on the remote control to
button and confirm with the
SqP
button.
select the channels on the TV-Video Combi.
MANUAL SEARCH
PROGRAMME NUMBER FREQUENCY DECODER
W P01
X
754 OFF
EXIT: MENU
STORE: OK
c In the line �PROGRAMME NUMBER�, select the function
with the buttons QSr or SqP or use the number buttons � 0..9 � on the remote control to select the desired programme number, e.g.: �P01�.
d Select the line �FREQUENCY� with the menu buttons
=P r
or
;P q
.
e Enter the frequency of the desired TV channel with the
number buttons
0..9
.
D If you don�t know the frequency of the desired TV channel, press SqP in line �FREQUENCY� to start the automatic search. Repeat automatic search until you have found the desired TV channel. A changing frequency number will appear on the TV screen.
f If you want to allocate a decoder, in line �DECODER�
select �ON� using the button
SqP
.
g To store the TV channel, press OK . �STORED� will
briefly appear on the TV screen. D If you would like to search for more TV channels, start again at step b.
h To end, press the MENU button.
