|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
6. HOW DO I RECORDDIRECTLY?
The easiest way to record is to directly record a TV programme that is currently being transmitted. And this is how to go about it:
1 Insert a cassette. 2 Use the
Recording with OTR
If you do not want to record to the end of the cassette, you can change the end time of the recording in 30 minute intervals.
1 Whilst recording, press the
button to select the programme number from which you wish to record, e.g.: '01'.
Pp
3 When you wish to start recording, press the
RECORD n
button on your remote control. The display shows at what time the recording will stop. or menu buttons you can add 30 minutes to
D
RECORD n
button.
2 With each subsequent press of the
C
A red light on the front of the set indicates that a recording is in progress.
this time.
3 If you wish to cancel the end time, press the
CLEAR
button.
As soon as the end time is reached, the set will switch off automatically.
Erase protection
4 Use the
STOP h
button to stop the recording. So that you don't accidentally delete an important recording, you can remove the special tab (erase protection) on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want the cassette to be erase protected, you can seal the gap again with adhesive tape or slide the special tab to the right again.
5 If, whilst recording, you want to switch off the
TV screen, press the STANDBY m button once. To switch the TV screen on again, press the P p button. Some general notes: * Programme number 'E1' is provided for recording from external sources (via the EXTERNAL scart socket). * If you have forgotten to load a cassette, the warning 'NO CASSETTE' will appear. * If, when you want to make a recording, you have accidentally loaded a cassette with erase protection, the cassette will be automatically ejected. * If the end of the cassette is reached during recording, the cassette will be automatically ejected. The set will then switch to standby after a few minutes. * When you make a new recording on a video cassette, it will automatically record over and delete any recordings already on the cassette. * Whilst a recording is being made you cannot switch to another TV channel.
14
|
|
|
> |
|