How to check or change a programmed recording (TIMER)
a Press the TIMER k button on the remote control. b Use the =P r or ;P q buttons to select the
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control. b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
programmed recording (TIMER) you wish to check or change.
c Press the TIMER k button. d Select the entry field with the QSr or SqP
The selected programmed recording (TIMER) has now been deleted.
d To end, press the MENU button.
button.
e Change any displayed information with the =P r or
;P q
button or with the
0..9
buttons.
f Confirm with the OK button. g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
D The programmed recording will only function properly, if the TV-Video Combi has been switched off using the button STANDBY m . D If the TV-Video Combi is turned on a few minutes before beginning a programmed recording or if is being used for playback, �PRESS OK TO START RECORDING� will appear on the screen. Change cassettes if necessary. Confirm this message with the button OK , to continue the programmed recording session. The TV-Video Combi switches off during this operation.
