|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO) HOTEL MODE CHECKING (Continued)
1 HOTEL MODE 1. Press the R/C FUNCTION key until language 10 SOUND 1. Receive "PAL-D/K" signal, press the "SOUND SYSTEM SYSTEM" to select B/G, I. Check the sound outFUNCTION appear, within five seconds press the (one/two CHECKING digit) key and keep pressing it for five seconds, put is not working properly. Select D/K and check 2. Key in the four digits password starting with 2. Receive "PAL-I" signal, press the "SOUND SYSTEM" to select B/G, D/K. Check the sound output number "1", "3", "7", "9" then the Hotel Mode will be enable, to switch ON/OFF the Hotel Mode is not working properly. Select I and check the please press volume up/down at R/C. sound output to make sure it is working properly. SYSTEM"to select I, D/K. Check the sound outHOTEL ON Set volume up/down by R/C key PASSWORD**** Input 1,3,7,9 by R/C key put is not working properly. Select B/G and check 3. After "ON" the Hotel Mode, user can't control erly. Preset mode, Fine Tuning, Skip mode and System the sound output to make sure it is working propthen the Hotel Mode with four digits password appears. erly.
No. point Adjusting procedure/conditions Waveform or others No. point Adjusting procedure/conditions Waveform and others
3. Receive "PAL-B/G" signal, press the "SOUND
the sound output to make sure it is working prop-
11 NOISE MUTE 1. Receive "PAL COLOUR BAR" signal. selection. Other functions are allowed to be used.
CHECKING 2. Turn up the volume control to maximum, make Note: Please OFF HOTEL mode after finish
sure sound is heard from speakers. Then checking the hotel mode. put the unit in no signal state. 4. To "OFF" HOTEL Mode, please follow steps (1) and (2) . 3. Check the sound mute is effective.
4. Finally turn sound level of CTV to minimum.
12 LANCheck OSD LANGUAGE quantity and type as EngGUAGE lish, Chinese, French, Arabic and Malay. No. point Adjusting procedure/conditions Waveform and others 1 SHOCK TEST 1. Hit at the top of TV set for two times. 2. Check set not damage and TV operation operate correctly.
SHOCK TEST CHECKING
QUANTITY CHECK
11
11-1 11-2
HEADPHONE JACK CHECKING
No. point Adjusting procedure/conditions Waveform or others
1 HEADPHONE Receive PAL COLOUR BAR with SOUND 1.
OUTPUT 400Hz, 100% MODULATION (�50kHz Dev). CHECKING
2. Maximum volume, and check the headphone
output with 400Hz and no sound out from speaker.
14D2-SS 20D2-SS 21D2-SS
|
|
|
> |
|