SHARP 14AP1W
Manual de Servicio

14AP1-S(S) 14AP1-W(S)

UA1 HOTEL MODE APPLICATION NOTE
The purpose of this HOTEL MODE is to enable hotel authorized person to store the tuned programs as hotel channels, current volume as maximum hotel volume, picture and sound setting. In addition, the end user will not be able to select Preset and Channel-setting functions. How to enable/disable the "Hotel Mode" ? Ans: a) Select the "Blueback" function (under "Menu-Feature" selection) by R/C, press the "-/--" (one/two digit) key and keep pressing it for five second, then you can see the hotel mode with four digits password. b) Key in the four digits password starting with number "1", "3", "7" and "9", then the hotel mode will be in enable condition, you can switch on/off the hotel mode by using R/C (volume up/down) key.

TROUBLE SHOOTING TABLE
NO RASTER
Check F701. Blown out.

Normal

Replace the fuse.

Abnormal

Check T701 pin (7) voltage (Approx. 310V at 220V AC)

The fuse is blown out again. Check IC701, D701 and D707.

HOTEL MODE ON PASSWORD ****

Set vol up/down by R/C key. Input 1, 3, 7 and 9 by R/C key.

Check R701, R707 and D709.

Normal

Check Secondary Main+B (Approx. 115V)

Abnormal

Normal
Check CRT connector K1-K5 bias. Does D1001 (Power LED

#1 Ch 1 is your selected channel for hotel mode. * We recommend Before set the hotel mode, it is better to choose ch 1 & set s-vol level Up to 75% full scale. After set hotel mode, starting channel will be always ch 1 & maximum sound level out will be set to 75% of full scale. * If you set hotel mode in AV, starting channel will be the last ch which you received before power off (same as normal operation)

Check IC702, IC753 and D758.

YES

Green) turn on ? NO Which does D1001 (Power LED Red) turns on or turns ON/OFF ?

Normal
Check R615 and R618.

Abnormal
Check IC801.

ON/OFF

ON
Checking the protector circuit.

18

CONDITION:
When using hotel mode, the user can only control "Picture", "Sound" and "Feature" selection. But it will return to the previous hotel mode setting condition after power off. The user can't use:-- "Ch-setting" (OSD become violet) and "Preset". The others function is allowed to be used.

Does horizontal circuit oscillate ?

NO
Check IC605, IC751 and IC801.

18-1

18-2