No hay comentarios de productos.
15
O
ETTING
UP A SMARTLOCK� ACCESS CODE
Main Features
16
A
HOW TO BLOCK CHANNELS
ver the next few panels you�ll learn how to block channels and get a better understanding of the rating terms for certain programming. First, let�s start by learning how to set a personal access code:
Picture Sound Features Install
SmartLock Format
SmartLock Format
Timer Start Time Stop Time Channel Activate Display
1 2 3 4 5 6 7
Press the CURSOR UP 5or DOWN buttons to select either CLEAR ALL or BLOCK ALL. If CLEAR ALL is selected, press the CURSOR RIGHT 3 button to clear all blocked channels. All channels will be viewable. If BLOCK ALL is selected, press the CURSOR RIGHT 3 button to turn the control ON or OFF. When ON is selected, ALL available channels will be blocked from viewing.
blocked.
3
Features Format SmartLock Confirm Code XXXX SmartLock Setup Code Clear All Block Channel OffStop Time Channel Activate Display Block All Movie Rating TV Rating
Press the CH + or CH � button to select other channels you wish to block. Repeat step 2 to block the new channel. When finished, press the STATUS/EXIT button to remove the menu from the screen.
Blocked By SmartLock Channel Blocking Access Code ----
channel that is blocked with Block Channel.
Block All Movie Rating TV Rating
Off
Block All
1 4 2 5 8 0 3 6 9
On
CH
POWER
4
4
1 4 7
2 5 8 0
3 6 9
CC
POWER
Use the CURSOR RIGHT 3 button on the remote to turn the rating option ON or OFF.
CH CH VOL
3
3 2
STATUS
EXIT
MENU
VOL
SLEEP
MUTE
SLEEP
MUTE
SURF
SMART
2 4
PICTURE
SOUND
3 5
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
1
SURF
SMART
PICTURE
SOUND
1
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
SLEEP
MENU
SURF
SMART
PICTURE
MUTE
2
NOTE: If you ever forget your code, the 0, 7, 1, 1 code is the factory default and can be used to enter and create a new access code.
SLEEP
MUTE
5
2 4
SLEEP
MUTE
SOUND
1 3
SURF
SMART
SURF
SMART
PICTURE
SOUND
6
PICTURE
SOUND
4
Press the CURSOR RIGHT 3 button on the remote to turn the option ON or OFF.
MAGNAVOX
When highlighted, each feature can be turned ON or OFF using the CURSOR RIGHT 3 or LEFT 2 buttons on the remote.
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
MAGNAVOX
MAGNAVOX
MAGNAVOX
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
MAGNAVOX
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
Some models refer to SmartLock as AutoLock in the on-screen menu. These features are the same.
21
C
HOW TO USE THE CLOSED CAPTION CONTROLS
losed Captioning (CC) allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses onscreen �text boxes� to show dialogue and conversations while the TV program is in progress.
22 Y
SETTING THE SLEEPTIMER CONTROL
our TV can be set to automatically turn itself off at a given amount of time. Press the SLEEP button on the remote control and the SLEEP timer display will appear on the screen.
1
CC Off
hether you�re watching a movie or a sporting event, your TV has automatic video control settings matched for your current program source or content.
23 W
USING THE SMARTPICTURE� CONTROL
he Smart Sound feature allows the listener to select between four different factory set sound options.
24 USING THE SMARTSOUND� CONTROL(20MS233S ONLY) T
25
USING THE SMARTSURF� CONTROL
26
martSurf lets you set up to eight channels in a quick viewing list. Then, you can use the SURF button on the remote control to switch between different TV programs that currently interest you. Press CH +/� or the Number buttons to select a channel to add to the SURF list.
S
Your remote control has an Alternatetoggle Channel button that allows you to
10 Surf 10 Add
1
Sleep 15
1 2 3
Press the CC button on the remote to display the current Closed Caption setting. Press the CC button repeatedly to choose from the four Closed Caption options (CC Off, CC1, CC2, or CC Mute). CC Mute will activate Closed Captioning when the MUTE button is pressed. When finished, press the STATUS /EXIT button to remove the menu from the TV�s screen.
2
CC Off
Press the SLEEP button repeatedly to pick the amount of time (15, 30, 45, 60, 90, 120, 180, or 240 minutes) before the TV will turn itself off.
Press the SMART PICTURE button on the remote control. The current Smart Picture setting will be displayed on the screen. Press the SMART PICTURE button repeatedly to select either PERSONAL, MOVIES, SPORTS, WEAK SIGNAL, or MULTIMEDIA picture settings.
1 4 2 5 8 0 3 6 9
CC
1
Personal
Press the SMART SOUND button on the remote control. The current Smart Sound setting will appear in the middle of the screen. Press the SMART SOUND button repeatedly to toggle between the four settings. (PERSONAL, VOICE, MUSIC, or THEATRE)
Personal
1 2 3
Surf List Empty 10 Surf 10
1 4 2 5 8 3 6 9
POWER
between the current and previous channel. For instance, if you are watching two games on TV, you can enter the channel numbers once and flip between the two channels with the touch of only one button. After entering the two channels numbers, so that one is the last viewed channel and the other is the current channel, follow the step below.
2
Sleep 15
1 4 7
A/CH STATUS EXIT
2
POWER
Press SURF while the channel number appears. Press 3 or 2 to add the channel to the SURF list or delete it from the list. An on-screen message will indicate whether you are adding or deleting the channel. Repeat steps 1 through 3 to add additional channels (up to eight) to the SURF list.
Delete
1
12 12 Surf 12 10
CH CH
1 4
2 5 0 8
3 6
CC
POWER
CH VOL CH
CC1 CC2
3
STATUS EXIT
A/CH
7
9
NOTE: An on-screen count down will appear during the last minute before the TV shuts itself off. If any button is pressed during the last minute of the countdown, the Sleeptimer setting will be cancelled.
2 5 8 0
3 6 9
CC
POWER
Sleep 30 Sleep 45 Sleep 90 Sleep 60
CH CH VOL VOL
Movies Sports Weak Signal Multimedia
CH CH VOL VOL
NOTE: The way you choose to set the Picture Menu Controls will become your PERSONAL setting.
7
A/CH STATUS
NOTE: The way you choose to set the Sound Menu Controls will become your PERSONAL setting.
1 4 7
STATUS A/CH EXIT
2 5 8 0
3 6 9
CC
POWER
Theatre Music Voice
CH CH VOL VOL
STATUS EXIT
A/CH
7
0
CC
VOL
VOL
Press the A/CH button on the remote control. The channels will toggle between the current channel and the last viewed channel.
MENU
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
VOL
MENU
SLEEP
MUTE
1 2
CC Mute
1 2
MENU
MENU
Sleep 120
MUTE
EXIT
MENU
SLEEP
Sleep 180 Sleep 240 Sleep off
During the last 10 seconds of a Sleeptimer setting, an on-screen display will read GOOD BYE.
SLEEP
MUTE
1 2
SLEEP
MUTE
1 2
MAGNAVOX
4
Add
SURF
SMART
SURF
SMART
SURF
SMART
PICTURE SOUND
12 Surf 10 12 4 Delete
SURF
SMART
PICTURE
SOUND
PICTURE
SOUND
PICTURE
SOUND
HELPFUL HINT
MAGNAVOX
Not all TV programs and product commercials are made with Closed Caption (CC) information included. Neither are all Closed Caption modes (CC1, or CC2) necessarily being used during the transmission of a closed caption program. Refer to your area's TV program listings for the stations and times of Closed Caption shows.
During the last minute of a Sleeptimer setting, an on-screen count down will be displayed. Pressing any button during the last minute will cancel the Sleeptimer.
MAGNAVOX
MAGNAVOX
MAGNAVOX
MOVIES - Preset picture options for watching Video Tapes, or DVDs. SPORTS - Preset picture options for watching sporting events. WEAK SIGNAL Preset picture options for watching programs where the reception is not at its best. MULTIMEDIA - Preset picture options for use with video gaming. THEATRE - for watchsound options Preset ing movies. MUSIC - Preset sound options for musical programming where there is little or no dialogue. VOICE - Preset sound options for programming where heavy dialogue is
Press SURF repeatedly during TV viewing to scan through the channels in the SURF list.
45 Sec
Good Bye 9 Sec
27
TROUBLESHOOTING
Remote Does Not Work �Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries. �Clean the remote control and the remote control sensor window on the TV. �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Be sure the fuse is not blown on the AC power strip, if one is being used. �Check to be sure the TV outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 �Repeat channel selection. �Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. �Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.
28
CARE AND CLEANING
PLACEMENT OF THE TV � To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can become excessively hot; for example, in direct sunlight or near a heating appliance. � Be sure to allow a free flow of air to and from the perforated back cover of the set. CLEANING � To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning. � Regularly dust the TV with a dry, nonscratching duster to keep the TV clean. � When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything abrasive. Do not use household cleaners. Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning. � Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water and a mild soap or detergent. Use a clean, dry cloth to dry the wiped surfaces. � Occasionally vacuum the ventilation holes or slots in the back cover of the set. � Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.
29
GLOSSARY
Remote Sensor Window � or opening found on the Television control panel through which infrared remote control command signals are received. Status/Exit � Allows the user to quickly confirm what channel number is currently being viewed. Status can also be used to clear the Television of on screen displays or information (rather than waiting for the displays to �time out� or automatically disappear from the screen). Surf � The action of scanning specific channel in a limited channel list. Twin Lead Wire � The more commonly used name for the two strand 300 Ohm antenna wire used with many indoor and outdoor antenna systems. In many cases this type of antenna wire requires an additional adapter (or balun) in order to connect to the 75 Ohm Input terminals designed into the more recent Televisions and VCRs. Tuner Mode � Feature control settings made by the TV. Designed for first time set up and use. Settings for signal connections (antenna or cable TV), plus channel program memory are held in the TV's memory (even if the set is unplugged and moved to a new location.)
30
Days a
against
MAGNA A
,
X
L
W WARRANTY
ay
the
No Power �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Check that the outlet is not on a wall switch. �Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture �Check antenna connections. Are they properly secured to the TV's ANT 75� plug? �Check the TUNER MODE control for the correct tuner setting. �Try running the Auto Program feature to find all available channels. �Press the CH+ or CH- buttons on the remote to make sure the correct signal source is selected (FRONT or Current Channel). No Sound (For model 13MT1533, connect up the headphone before checking) �Check the VOLUME buttons. �Check the MUTE button on the remote control. �If you�re attempting to hook up auxiliary equipment, check the audio jack connections located on the front of the TV.
WARNING Concerning Stationary Images on the TV Screen: Do not leave stationary or letterbox images on screen for extended periods of time. This can cause uneven picture-tube aging. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen. Be careful not to leave nonmoving images on screen for extended periods of time, or to display the same images on screenimages can be left on the subtle ghost too frequently, because picture tubes. Sources of stationary images may be DVD disks, laser disks, video games, CD-i disks, videotapes, digital television boxes, broadcast channels, cable channels, satellite channels, and others. Here are some examples of stationary images (this is not an all-inclusive list; you may encounter others in your viewing): � DVD menus�listings of DVD disk content � Letterbox black bars�shown at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed on a TV with standard (4:3) aspect ratio. � Video-game images and scoreboards � Television station logos�present a problem if they are bright and stationary; moving or low-contrast graphics are less likely to cause uneven aging of the picture tube � Stock-market tickers�presented at the bottom of the TV screen � Shopping channel logos and pricing displays�bright and shown constantly or repeatedly in the same location on the TV screen.
Auto Programming � The procedure of adding or deleting channel numbers into the Television�s memory circuits. In this format the Television �remembers�� only the locally available or desired channel numbers and skips over any unwanted channel numbers. Coaxial Cable � A single solid antenna wire normally matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR. Closed Caption � Broadcast standard which allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress. Side Audio/Video Inputs � Located on the side of the TV these connectors (phono type plug) are used for the input of audio and video signals. Designed for easy use with VCRs or cameras. On Screen Displays (OSD) � Refers to the wording or messages generated by the television (or VCR) to help the user with specific feature controls (color adjustment, programming, etc.). Menu � An on-screen listing of feature controls shown on the Television screen that are made available for user adjustments.
p, y or by these or eceipt is determined to be defecy ys will S. for o-
� the
SER R
IN
( (French Speaking) g) Speaking)
or
y, not
warranty you
, an
to
P.O.
33152
(402) 536-4171
5
The screen will ask you to enter a �New Code.� Enter a �new� 4 digit code using the NUMBERED buttons. The screen will then ask you to CONFIRM the code you just entered. Enter your new code again. �XXXX� will appear when you enter your new code and then display the SmartLock� menu options. Proceed to the next panel to learn more...
1
2 5 8 0
3 6 9
CC
POWER
6 7 1
4 7
A/CH
CH CH
VOL
2 4
NOTE: If you ever forget your code, the 0, 7, 1, 1 code is the factory default and can be used to enter and create a new access code.
1
A/CH
When finished, press the STATUS/EXIT button to remove the menu from the screen.
VOL
4
STATUS EXIT
MENU
NOTE: If you ever forget your code, the 0, 7, 1, 1 code is the factory default and can be used to enter and create a new access code.
3
7
A/CH STATUS EXIT
CH
CC
VOL
1
VOL
When a rating level is chosen to be blocked, any higher level rating will also be blocked from viewing. (i.e.: If �R� is selected to be blocked, NC-17 and X will automatically be blocked.)
5
Press the CURSOR RIGHT 3 button to display the FEATURES menu options. Press the CURSOR UP 5 or DOWN buttons until the words SmartLock� are highlighted. Press the CURSOR RIGHT 3 button. The screen will read, �ACCESS CODE - - - - .� Using the NUMBERED buttons, enter 0, 7, 1, 1. �XXXX� appears on the Access Code screen as you press the numbered buttons. �INCORRECT CODE� will appear on the screen, and you will need to enter 0, 7, 1, 1 again.
Block Channel
Channel 12
On
PG, TV-14, or TV-MA).
2
Enter your Access Code to view a tuned
Features SmartLock Format
Access Code XXXX Incorrect
Features SmartLock Format
New Code ----
SmartLock Block Channel Setup Code Clear All
3
Press the CURSOR UP 5 or DOWN buttons to highlight any of the Movie Rating options. When highlighted, all these options can be turned ON (which will allow blocking) or OFF (which will allow viewing).
R NC-17 X
G
1 4 7
STATUS EXIT A/CH
On
2 5 8 0 3 6 9
CC
POWER
CH
CH
VOL
VOL
1 3
4
MENU
5
2
Press the CURSOR RIGHT 3 button to turn blocking ON or OFF for that channel. When ON is selected the channel will be
5
1
Clear All
Cleared
2
Press the CURSOR RIGHT 3 button to display the MOVIE RATING options (G, PG, PG-13, R, NC17, or X).
Movie Rating G PG PG-13
Off
3
Press the CURSOR UP or DOWN buttons to highlight any of the TV Rating options. When highlighted, all these options can be turned ON (which will allow blocking) or OFF (which will allow viewing). NOTE: Some TV RATING options also have sub-ratings. The ratings of TV-Y7, TVPG, TV-14, TV-MA can be customized to block V (violence), FV (fantasy violence), S (sexual situations), L (coarse language), or D (suggestive dialogue). Press the CURSOR RIGHT 3 button on the remote to turn the TVY or TV-G rating ON or OFF. Or, press the CURSOR RIGHT 3 button to enter the sub-menus for the TV-Y7, TV-PG, TV-14 or TV-MA ratings. If the TV-Y7, TV-PG, TV-14 or TV-MA sub-menu is accessed, press the CURSOR UP 5 or DOWN buttons to select one of the options (Block All, V, S, L, D, or FV).
5
TV-Y TV-Y7 TV-G TV-14 TV-PG
On Block All, FV Off Block All, V, S, L, D Block All, V, S, L, D
2
Press the CURSOR RIGHT 3 button to display the Blocking Options (BLOCKING, UNRATED, or NO RATING) menu.
BLOCKING: Might be called the �master switch� for SmartLock�. When ON, ALL blocking/censoring will take place. When OFF, ALL blocking is disabled. UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set to ON and the BLOCKING feature is set to OFF. NO RATING: ALL programming with NO content advisory data can be blocked if set to ON and the BLOCKING feature is set to OFF.
TV-MA
Block All, V, S, L
1 4
A/CH STATUS EXIT
2 5 8 0
3 6
CC
CH
7
9
1 3 5
VOL
CH
1 3 5
POWER
VOL
MENU
2 4 6
3
Press the CURSOR UP 5 or DOWN buttons to highlight the desired feature.
5
5
Features SmartLock Format
Access Code ----
Features SmartLock Format
Access Code XXXX
1
Press the CURSOR UP 5or DOWN buttons until the words BLOCK CHANNELS are highlighted.
TV Rating
5
Press the MENU button on the remote to show the on-screen menu. Press the CURSOR UP 5 or DOWN buttons until the word FEATURES is highlighted.
Movie Rating
Press the CURSOR UP 5 or DOWN buttons to highlight the words MOVIE RATING.
5
fter your personal access code has been set (see previous page), you are now ready to select the channels or the A/V Inputs you want to block out or censor. Once you�ve entered your access code and the SmartLock� features are displayed on the screen:
SmartLock Block Channel Setup Code Clear All Block All OffStop Time Channel Activate Display
fter blocking specific channels there may come a time when you want to block or clear all the channels at the same time. Once you�ve entered your access code and the SmartLock� features are displayed on the screen:
17 A
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
18
T
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
SmartLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating
19
T
BLOCKING PROGRAMS BASED ON TV RATINGS
20
S
OTHER SMARTLOCK� BLOCKING OPTIONS
SmartLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating Clear ?Stop Time Channel Activate Display
he SmartLock� feature can block programming based on the Movie Industry ratings. Once you�ve entered your access code and the SmartLock� features are displayed on the screen:
G PG PG-13 R NC-17 X
he SmartLock� feature can block programming based on the TV Industry ratings. Once you�ve entered your access code and the SmartLock� features are displayed on the screen: Press the CURSOR UP 5 or DOWN buttons to highlight the words TV RATING. Press the CURSOR RIGHT 3 button to display the TV RATING options (TV-Y, TV-Y7, TV-G, TV-
TV Rating T V-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Off
1
martLock� offers the viewer other blocking features as well. With these Blocking Options, the censoring can be turned ON or OFF. Once you�ve entered your access code and the SmartLock� features are displayed on the screen:
SmartLock Setup Code Clear All Block All Movie Rating TV Rating Block Options
1 2
1
Press the CURSOR UP 5 or DOWN buttons until the words BLOCKING OPTIONS are highlighted.
5 5
Blocking Unrated No Rating
1 4 7
A/CH STATUS EXIT
On On On
2 5 8 0 3 6 9
CC
POWER
CH
CH
1 3 2 4
VOL VOL
4
MENU
SLEEP
MUTE
1 3
SURF
PICTURE
SMART
SOUND
MAGNAVOX
ALTERNATE CHANNEL
1
A/CH
7 4
2 0 8 5
3
CC
9
6
STATUS EXIT
VOL
CH
VOL
CH
POWER
MENU
SLEEP
MUTE
SURF
SMART
PICTURE
SOUND
MAGNAVOX
