3COM 09-1345-001
Manual del propietario

Disabling PC Card (PCMCIA) Support for Windows 95

3-15

4 Click OK. 5 Reboot the notebook to disable PC Card Support. If prompted, select Do Not Install a Driver. Some notebooks may re-install the PCMCIA sockets (PC Card Support) without prompting you. Refer to Windows 95 help on disabling devices to disable PCMCIA sockets. You must re-enable PC Card Support to use another PC Card. See �Re-enabling PC Card Support for Windows 95� in this chapter for instructions.

Re-enabling PC Card Support for Windows 95
If you disabled PC Card Support to use the CardBus PC Card, you must re-enable it to use another PC Card. 1 In the Control Panel, double-click System. 2 Double-click Add New Hardware. 3 Click No to detect automatically. 4 On the Hardware Types list, select PCMCIA Socket and click Next. 5 On the manufacturer�s list, select the PC Card Support that you disabled in Chapter 2. 6 Click Next. 7 Click Finish. 8 Reboot the notebook. 9 In the Control Panel, double-click System. 10 In the System Properties window, click Device Manager and then double-click PCMCIA Socket. 11 Click PCIC or compatible PCMCIA controller. 12 Place a check mark in the check box to enable the device. 13 Click Change Driver. 14 Follow the Enable PCMICA Support Wizard. 15 Restart the notebook to re-enable PC Card Support.