ZANUSSI ZWF1460S
Manual de Usuario

7. Select the spin speed or the RINSE HOLD option
Press the �Spin� button repeatedly, in order to select the desired spin speed or the option. The relevant light will light up. If you select the option, the machine will stop at the end of the programme with the water still in the tub. ZWF 1240 W ZWF 1420 W
1200 900 700 500 1400 1200 900 700

9. Select the DELAY START
To delay starting of the programme, press the DELAY start button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.

Delay Start

Spin

Spin

During this period it is possible to load other laundry: � depress START/PAUSE button; � load the laundry; � close the door and depress START/PAUSE button again.

ZWF 1640 S - ZWF 1640 W
1600 1200 700 900

10. Start the programme
Press the START/PAUSE button. The relevant light will stop flashing. and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay.

Spin

8. Select the desired options
If your laundry is very dirty, it may be advisable to select the �Prewash� option. If you wish the laundry to undergo an extra rinse, select the �Super Rinse� option. If your laundry is only slightly soiled, select the �Extra Quick� option. Selecting the �Easy Iron� option your laundry is gently washed and spun to avoid any creasing.

11. How to change a programme during its cycle
You can alter the programme before it starts. When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme. Start it by depressing the START/PAUSE button.

Prewash

Extra Quick

Super Rinse

Easy Iron

12. How to interrupt a programme during its cycle
Depress the START/PAUSE button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme.

Select the OPTIONS button so as to cause one or few lights to light up.

11