ZANUSSI ZWF1434W
Manual de Usuario

Important! If you accidentally press the �Skip Reset� button more than once, the display will show three flashing dashes. To drain the water, select any washing programme by means of the FABRICS button, then press �Skip Reset� three times in order to select the drain (only the �drain� light will remain lit).

Furthermore the washing temperature will be reduced automatically and the washing time will be prolonged. The Super Rinse and the 40° AA options cannot be selected together by means of the relevant button.

8 Display
The following pieces of information are shown on the display: � Three flashing dashes, when a programme is cancelled by means of the Skip Reset button. The three flashing dashes will also appear when you press the On/Off button to switch the machine on, if the previously selected cycle has been erased.

6 WASH CHOICE button
Press this button to select the following options: � Prewash: select this option if you wish your laundry to be prewashed before the main wash (not available for wool and hand-wash cycle). The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. � Outdoor Sports: select this option if you wish to perform a soak of about 30 minutes at 30°C to your laundry. By pressing the DELAY START button the soak time can be prolonged up to 10 hours max. After this time the wash cycle will automatically start. This function is not available for wool and hand-wash cycle. The soak ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. � Extra Quick: select this option for laundry that is only slightly soiled (not for Wool and Handwash programme). The washing time will be reduced according to the type of fabric and the selected temperature. The Prewash, the Outdoor Sports and the Extra Quick options cannot be selected together.

---

� Duration of washing programme in hours and minutes, after you have selected a programme. While the programme is running (after you have pressed the Start/Pause button), the displayed time value decreases by one unit every minute. � The washing machine has stopped with water in the tub, at the end of a programme with the Rinse Hold option: this is indicated by a flashing zero. � The washing machine has completed the programme: this is indicated by a flashing zero. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the Skip Reset button. Important! The first time you use the washing machine, when you switch it on, it may display a flashing zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer�s inspection tests, and this cycle has not been erased after its completion.

7 OPTIONS button
Press this button to select the following options: � Super Rinse: this option can be selected with all programmes except the wool and Handwash programmes. The machine will add 2 rinses to Cotton programmes and 1 rinse to Synthetics and Delicates programmes. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. � 40° AA: this option can be selected for cottons and synthetics lightly or normally soiled with 40°C or higher temperature.

7