AEG ZWF 1231 W
Manual de Usuario

To select Drain only, press the �Skip� button three times, the wash - rinses - spin LED,s go out. The drain LED only remains alight.
Prewash Wash Rinses

12 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.

Spin
Drain

Prewash Wash Rinses Spin Drain

11 �Delay� button
This button makes it possible to delay the starting of the programme selected from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. You must select this option after you have set the programme and before you press the �Start/Pause� button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the Start/Pause button. If you have already pressed the Start/Pause button, and you wish to cancel the delay time, proceed as follows: � set the washing machine to Pause by pressing the �Start/Pause� button; � press the �Delay� button until the display shows the symbole «0�». � press the �Start/Pause� button again. Important! The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to Pause by pressing the �Start/Pause� button. After you have closed the door, press the �Start/Pause� button again.

After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

10