Installation of the appliance in a �tted kitchen unit (Fig. 3)
Drill the unit using a � 2.5 mm drill (10 mm max. penetration); Fix the square �tting (1) to the appliance and apply the rubber seal; Fit the refrigerator into the space recessing it by 48 mm in relation to the unit base (Fig. 4);
13mm
Fig. 3
� 2,5
2 1 4 2 3
Fix the refrigerator with the screws (2) to the upper and lower part of the unit, after having inserted the �ttings (3) under the lower hinges; Fix the square �tting (1) to the unit column. Snap the ventilation grid. Insert the hinge cover (4).
4 2 3
D612
Fig. 4
48mm
D583
Instructions to assemble the refrigerator door to the kitchen unit door
Position the runners (C) at the top and bottom of the inside of the kitchen unit as shown in Fig. 5 and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws.
D135
