Dolby Digital
Dolby Digital is available from DVD players, some games console players, etc. These must be connected using a Scart or phono lead for the picture and an optical or a coaxial cable for the sound.
Arrange the speakers as shown on page 6 then set up the TV as follows:
Delay time
If the rear speakers and seating are a long way from the TV, the sound from the rear speakers will reach you before the sound from the front. A higher setting in the Delay time option can restore the correct balance. Select Surround set up from the Feature menu. Select the Delay time option, use S or R to adjust the setting to a suitable value. Press EXIT to finish.
1
Connect the DVD to the TV using phono leads to the COMPONENT VIDEO INPUT or a Scart lead to EXT 2, and an optical or coaxial cable to to the optical/coaxial sockets, DA-1 or DA-2.
M
M
2
Set the Digital input-1 in the AV connection menu (see page 16) to EXT 2 if Scart 2 is used or EXT 4 if the equipment is connected to COMPONENT VIDEO INPUT.
1 2 3
3
If external front speakers are connected the External speaker switch on the back of the TV must be set to EXT (see page 6). The centre channel will not be heard without external front speakers connected. Make sure the rear speakers are connected, then in the Feature Menu press Q to select Surround set up. Use R to set the Rear speaker option in the Surround set up menu to YES.
Sound adjustment 1 2
Set the volume and balance of the front speakers. Play a Dolby Digital film and press on the remote control. The Surround menu will appear giving an indication of the channels available e.g. Dolby Digital 3/2 (see the table). Press P and Q to select the speakers, then use S or R to adjust. The number of adjustable speakers will depend upon the signal received from the DVD player. Press EXIT to finish. Alternatively select Surround test in the Surround set up menu. In order to get full Dolby Digital the DVD player must be connected using the coaxial or optical links. Dolby 1/0 = 2/0 = 2/1 =
2/2 =
4
M
5
Press Q to select Surround out and set the option to SP OUT (Surround speakers out).
Surround set up
M
3
YES SP OUT
Back Rear speaker Surround out Surround test Delay time
4
If an external amplifier is to be used to power the surround speakers set the Surround out option to EXTERNAL. No sound will come from the surround sound terminals if this option is chosen.
Surround set up
Back Rear speaker Surround out Surround test Delay time YES EXTERNAL
3/0 = 3/1 =
If the Rear speaker option is set to NO, no sound will be heard from the rear speakers and the Surround out option will not be selectable.
3/2 =
Digital Centre speaker only. Front Left and Front Right only. Front Left and Front Right + Rear Left and Rear Right combined. Front Left and Front Right + Independent Rear Left and Independent Rear Right. Front Left and Front Right and Centre. No Rear Speakers. Front Left and Front Right and Centre + Rear Left and Rear Right combined. Front Left and Front Right and Centre + Independent Rear Left and Independent Rear Right.
