AEG ZI920KA
Manual de Usuario

Instructions for totally built-in appliances Door reversal
The appliance is supplied with the door hinges on the right or on the left. To change the opening direction of the doors proceed as follows before installing the appliance. 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packaging; 2. Unscrew the upper pin and remove the spacer. 3. Remove the upper door.

4. Unscrew the middle hinge and the brackets and refit them on the opposite side. 5. Refit the upper door, the upper pin and the spacer on the opposite side.

6. Unscrew the lower pin and remove the spacer and refit them on the opposite side.

Recess dimensions Height (1) 1780 mm Depth (2) 550 mm Width (3) 560 mm To ensure adequate ventilation, allow the clearances shown in figure.

50 mm

min. 200 cm

2

min. 200 cm2

D567

50

Furthermore, it is necessary that the cabinet has a ventilation recess with the following dimensions: depth 50 mm width 540 mm

540

3

2

1

PR01

16