AEG ZHC935
Manual de Usuario

INSTALLING THE COOKER HOOD
Fitting the Chimney Stack
The chimney consists of two sections. The upper chimney measures 215mm and the lower chimney (with the holes for recirculation on either side) measures 740mm. -

7.2.1

Upper Chimney Stack
Expand the sides of the upper chimney stack item 2.1 and place the chimney over the two brackets 7.2.1 ensuring they are well seated. Secure the chimney stack to the brackets 7.2.1 using the four self tapping screws 12c - 2.0x6.5mm.

12c 2.1 2 8b 2.2 8a

-

-

Lower Chimney Stack
Expand the of the lower chimney stack item 2.2 and place the chimney over the upper chimney stack item 2.1 and the canopy item 1. Secure the chimney stack to the canopy using the two screws item 12c 2.9x6.5mm. After the chimney has been secured into position, insert the two plastic recirculation grilles item 8a (right-hand) and 8b (left-hand) in the apertures on each side of the chimney. The grilles are marked with two arrows and should be fitted with one arrow pointing upwards and the other toward the front. When the hood is used in the recirculation mode ensure that the grilles are properly secured to the recirculation extension spigot 14.1.

12c

-

-

-

15