ZANUSSI ZHC932X/S
Manual de Usuario

� Mount the chimney holder close to the ceilingwith the rawl plugs and the screws. Warning! Be careful that it is centered over the hood and horizontally aligned. Chimney holder

Fig. 9
Centre line � Hang the hood on the wall again. Additional hanging points

Hooks

Chimney holder Chimney fixing points

Fig. 10

Tube � Secure it with the 2 lower screws.

Fitting for ducting
� Connect a tube between the hood air outlet and the wall or roof exhaust channel.

Chimney

Recirculation spigot Supply cord

Fitting for recirculation
� Mount the recirculation spigot with the 4 screws supplied.

Air outlet

Mounting the chimney
� Connect the supply cord to the mains. � Place the chimney and fix it to the top chimney holder with the two screws supplied. � Lower the bottom part of the chimney to the top of the hood. Lower screws

Fig. 11
41