AEG ZEBF 336
Manual de Usuario

OPERATION
Before using
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.

Control panel

A BC D
ABCDEAlarm light - Red Fast freeze light - Amber Fast freeze switch Freezer Pilot light - Green Freezer Thermostat control knob

E
FG-

F

G

Fridge Pilot light - Green Fridge Thermostat control knob

Control Panel
A. Alarm light
If the alarm light (A) illuminates, it indicates that the temperature within the freezer has reached a level where safe food storage is no longer ensured. When the freezer is first switched on, the alarm light will stay on until the temperature has dropped to a safe level for the storage of frozen food.

Start your appliance
Allow the appliance to stand for 2 hours after installation. Insert the plug into the wall socket. The pilot light (D) will illuminate to show that the appliance is on. Turn the thermostat control (G) to a midway setting. The pilot light (F) will illuminate. Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside. To switch off the appliance turn the thermostat control to position �O� .

B. Fast freeze light
The fast freeze light is illuminated, to show that the fast freeze function is working.

C. Fast freeze control switch
When you place fresh food in the appliance, press the fast freeze control switch.

Temperature control
The temperature within the freezer is controlled by the thermostat situated at the top of the cabinet. To operate the freezer proceed as follows: Turn the thermostat control knob beyond the «O» position. When you first start the freezer, we suggest that you turn the thermostat control to a medium setting. For easier turning of this control, use a small coin.The internal temperature of the freezer is automatically adjusted by the thermostat to ensure safe food storage. However, if the appliance is working in unfavourable room conditions such as poor ventilation, high temperature,

D. Pilot light
The operation light is illuminated continuously, to show that the appliance is on.

E. Thermostat control knob
Turn the thermostat control knob clockwise to required setting.

4