ZANUSSI ZD23/5R3
Manual de Usuario

Warnings for your safety
Warnings for your safety. Carefully read these instructions before installing and using the machine.
This freezer is designed to be operated by adults only. Children should not be allowed to tamper with the controls or play with the product. Any electrical work required to install the appliance should be carried out by a qualified electrician or competent person. This appliance is heavy. Care should be taken when moving it. Make sure that the cable is not trapped underneath the appliance, nor touches the motor. Repairs carried out by inexperienced persons may cause injuries or serious malfunctioning. Refer to the nearest Authorized Dealer. Make sure the rear part of the appliance stands against a wall as there are working parts which heat up and should not be of easy access. Make sure that there is a continous and adequate ventilation as a failure to do so may result in damage to the appliance or deterioration of the food. The appliance should be left for at least 4 hours after installation before it is turned on ill order to allow the refrigerant to settle. This product must be serviced only by an AUTHORIZED DEALER, and only GENUINE SPARE PARTS must be employed. Before cleaning or reparing the appliance, make sure it is unplugged. It is dangerous to alter the specifications or modify this product in any way. These domestic refrigerators are designed to be used specifically for the storage and conservation of food. DO NOT USE SHARP INSTRUMENTS to scrap off frost or ice. Frost may be removed by using a plastic scraper. (See defrosting instructions).
15

Frozen food must not be re-frozen once it has been thawed out. Manufacturer�s storage recommendations should be strictly complied with. Lollies can cause frost burns if consumed right away from the freezer. Do not place carbonate or fizzy drinks in the freezer as these may explode. When an old freezer is to be discarded make sure to: Dismount the doors in order to prevent children from getting trapped inside. Have the gas from the cooling system withdrawn before making it to scrap iron.