valves on the surface burners, insert a small slotted screwdriver into the hole on the valve rod and turn the choke screw to the right or left until the burner flame is adjusted to minimum. If the cooker is equipped with safety valves, the choke is not located in the rod hole, but on the valve body. For LPG screw completely the by-pass screw. Reassemble the parts following the same procedure in reverse.
Check that, when turning the knob quickly from the maximum position to the minimum one, the flame does not go out.
AFTER COMPLETION OF ANY REPAIRS, ADJUSTMENTS OR CONVERSION THE STATUTORY SAFETY TESTS MUST BE CARRIED OUT.
Stick the label supplied with the appliance (in the nozzles bag) onto the rating plate in accordance with the gas type utilised. The grill burner always operates at maximum and therefore no minimum adjustment is necessary.