ZANUSSI ZC345P-1
Manual de Usuario

Water comes out on the floor. The compressor operates continuously.

Place the drain hose at the back of the cabinet above the drain bowl. See the chapter "Before using the cabinet the first time". Set a warmer temperature. Make sure that the door is completely closed and that the insulating strip is complete and clean. The cabinet is not switched on. Power does not reach the cabinet. (Try connecting another electrical device to the power outlet.) The fuse has blown. The power plug is not properly connected.

The cabinet does not operate at all. Cooling or interior light does not operate. No indicator lamps light.

Sound level in cabinet is too high.

The refrigerating system will always produce some sounds. A pulsing sound is heard when coolant is pumped inside the cooling pipes. A ticking sound from the thermostat can be heard when the compressor switches on and off. The sound level varies depending on the operation of the cabinet. If you feel the sound level is incorrect: Make sure the pipes at the back of the cabinet not touch each other. Carefully bend them if they do. If the cushion spacers (between the cabinet wall and pipes) come loose, put them back in place again. Carefully follow the instructions in the chapter "Installing the cabinet".

Guarantee Conditions
See Guarantee Conditions on the Registration Card.

Technical specification
Model Net volume Width Height Depth Energy consumption Energy class Rated power ZC345R/ZC345P--1 328 l 595 mm 1600 mm 600 mm 230 kwh/year B 110 ZC395R/ZC395P--1 379 l 595 mm 1800 mm 600 mm 248 kwh/year B 110

GB

Installation
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling. For more information, contact your local city office or the dealer. Do not allow children to play with the packaging. The plastic film can cause suffocation.

GB

Zanussi 818 14 55-02/6

18