Non-fading Output
Turning the Non-fading output ON or OFF. (Z738) Turning the Non-fading output ON or OFF while the preout is switched to the non-fading preout. Press the [NF] button for at least 1 second. Each time the button is pressed Non-fading output switches ON or OFF. When it�s ON, "NF ON" is displayed.
Reattaching the Faceplate
1
Align the shaft on the unit with the depression on the faceplate.
2
Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate
TEL Mute
The audio system automatically mutes when a call comes in. When a call comes in " (CALL)" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The " (CALL)" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The " (CALL)" display disappears and the audio system comes back ON.
1 2
Press the Release button. Drop open the faceplate. Drawing the faceplate to left side pull it to the front and remove it.
� The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. � Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
