Changing dustbag
Change dustbag S when display F is filled with colour (can be checked with the appliance operating at maximum suction and with the nozzle raised from the floor). A change may be necessary even if the bag does not appear to be full. Fine dust can block the pores and reduce the suction power of the appliance. Switch off the appliance and open the dust chamber lid by pulling release catch G. Remove dustbag S by pulling on the sealing tab. Push new dustbag into the retainer until it clicks into place. Take care when closing the dust chamber lid that the dustbag is completely inside the dustchamber border. The dust chamber lid will not close unless a dustbag has been inserted. Please do not use force!
S
E54AB Standard S-bag�, E202B Clinic S-bag�, E203B Anti Odour S-bag�, S-bag� Long Performance
