|
No hay comentarios de productos.
XV-S200BK/XV-S300BK/XV-S302SL XV-S400BK/XV-S402SL
Removing the rear panel (see Fig.5)
*Prior to performing the following procedure, remove the top cover. 1.Remove the seven screws D attaching the rear panel on the back of the body. * As for the screw D, the number and the position are different according to the destination and model. E D D Fig.5 Hook d Hook c
Front panel assembly
Rear panel
D
Removing the front panel assembly (see Fig.6,7)
* Prior to performing the following procedure, remove the top cover. * There is no need to remove the mechanism assembly. 1.Remove the one screw E attaching the front panel assembly on the bottom chassis. 2.Disconnect the wire from CN702 and CN703 on the main board respectively.
Hook d Fig.6
Mechanism assembly 3.Hook c and d are removed respectively, and the front panel assembly is removed. CN702
CN703
Main board Fig.7
Removing the main board (see Fig.8)
* Prior to performing the following procedure, remove the top cover, mechanism assembly and rear panel. 1.Disconnect the wire from CN702 and CN703 on the main board respectively. 2.Remove the four screws F attaching the main board on the bottom chassis.
CN702
F
Main board
F
CN703
F
Fig.8
F
1-7
|
