JVC XVE100SL
Manual de Servicio

XV-S40BK/XV-S42SL/XV-E100SL Removing the pickup (See Fig.16 and 17)
1. Remove the screw I attaching the T spring (S) and the shaft holder. Remove also the plate.
Pickup Joint n Shaft holder

I
ATTENTION: When reattaching, make sure that the T spring (S) presses the shaft.
Plate

2. Pull out the part l of the shaft upward. Move the part m in the direction of the arrow and detach from the spindle base. 3. Disengage the joint n of the pickup and the shaft in the direction of the arrow. 4. Pull out the shaft from the pickup.
Part l

Part m

T spring (S)

Fig.16
Actuator

5. Remove the two screws J attaching the actuator. 6. Disengage the joint of the actuator and the lead spring. Pull out the lead spring.
Actuator

J

Lead spring

Lead spring

Pickup

Shaft Spring

Pick-up

Shaft

Fig.17

The spring must be under the shaft when you install pick-up.

K

Shaft Shaft holder

Removing the shaft holder / shaft (See Fig.18)
1. Remove the screw K attaching the shaft holder. 2. Remove the shaft.

Fig.18

1-13