Inicio >>
JVC >>
XM-PX55-BU/SU/RD Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
XM-PX55BU/MX-PX55SL XM-PX55RD
Removing the feed motor (See Fig.12)
1. Peel off the part h of the flexible wire on the underside of the feed motor. 2. Unsolder the solder joint i connecting the flexible wire to the feed motor. 3. Peel off the part j of the flexible wire. 4. Remove the two screws J attaching the feed motor on the upper side of the chassis assembly. ATTENTION: When reassembling, reattach the flexible wire with an adhesive tape and solder the appropriate part.
Chassis
Feed motor
j
J
i
h
Fig.12
Removing the switchi board assembly (See Fig.12)
1. Remove the switchi board assembly attached to the side of the chassis assembly with the double-sided tape. 2. When reassembling, reattach the switchi board assembly with an adhesive tape as before.