Playing Back a Disc
English
This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote control if they have the similar names (or marks) as those on the front panel. If operations using the remote control are different from those using the front panel, they are then explained. 4/1 ¢/¡
Disc tray
23
7
PROGRAM
SET
CLEAR
COMPACT DISC RECORDER
XL-R910
REPEAT
AUTO TRACK
FINALIZE
REC PAUSE
REC
REC LEVEL
POWER
_ON/ �OFF
RANDOM
DISPLAY
REC SOURCE
DIGITAL ERASE SYNCHRO
MIN
MAX
1
DISPLAY
REPEAT
8
This unit has been designed to play back the following discs: � Audio CD (CD) � CD Recordable (CD-R) � both finalized and unfinalized discs � CD Rewritable (CD-RW) � both finalized and unfinalized discs
3 Start Playback
Press 3.
The disc tray automatically closes (�CLOSE� flashes on the display), and the unit starts reading the disc information recorded on the disc (�TOC READ� flashes), then starts playback � Normal Play. When you have loaded a CD. (See also notes below.)
1 Turn On the Power
Press POWER to set it to the _ ON position. The display illuminates.
Remote NOT
POWER
_ON/ �OFF
If a disc is already loaded, the total track number and the total playing time appear.
2 Load a Disc
1 Press 0 to open the disc tray.
Notes:
2 Insert a disc � CD, CD-R or CD-RW.
� If you have loaded a CD-R, the CD-R indicator lights up. (If the disc is finalized, the FINALIZE indicator also lights up.) � If you have loaded a CD-RW, the CD-RW indicator lights up. (If the disc is finalized, the FINALIZE indicator also lights up.)
To stop playing, press 7. To eject the disc, press 0. CORRECT INCORRECT To turn off the unit, press POWER to set it in the � OFF position so that the display goes off.
� When using a CD single (8 cm), place it on the inner circle of the tray.
