PIONEER X-HTD8/DPWXJ
Manual de Usuario

Getting started

04

1

If the system isn�t already on, press STANDBY/ON to switch on.

1 Press SYSTEM SETUP (SHIFT + HOME MENU). 2 Use the / (cursor left/right) buttons to choose �FM Mode ?�, then press ENTER. 3 Use the / (cursor up/down) buttons to select �FM Mono� or �FM Auto�, then press ENTER. Select Auto in step 3 to switch back to autostereo mode (the stereo indicator lights when receiving a stereo broadcast).

2 Press TUNER to switch to the tuner, then press repeatedly to select the AM or FM band. The display indicates the tuner band and the frequency. � If you�re using the front panel controls, the TUNER button switches between FM, AM and station presets (see Memorizing stations on page 35). 3 Tune to a frequency. There are three tuning modes�manual, auto, and high-speed: � Manual tuning: Press TUNE +/� repeatedly to change the displayed frequency. � Auto tuning: Press and hold TUNE +/� until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to search for other stations. � High-speed tuning: Press and hold TUNE +/� until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method.

Memorizing stations
You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 Tune to an AM or FM radio station. For the FM band, select mono or auto-stereo reception as necessary. This setting is saved along with the preset. 2 Press SYSTEM SETUP (SHIFT + HOME MENU). 3 Use the / (cursor left/right) buttons to choose �St. Memory?� then press ENTER. 4 Use the / (cursor up/down) buttons to select the station preset you want. There are 30 preset locations; each can store one station preset. 5 Press ENTER to save the station preset.

� You can use the and buttons on the front panel instead of the TUNE +/� buttons.

Improving poor FM reception
If you�re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.

� If the system is unplugged from the power supply completely, saved stations will remain for several days, after which you�ll have to save them again.

35
En