1 Tangential and Radial Height Coarse Adjustment START
� Remove the 05SD Pickup Assy from the Traverse Mechanism Assy-S. � Remove the joint and the joint spring of the 05SD Pickup Assy.
A
05SD Pickup Assy
Joint
Note: Before removing the flexible cable for the pickup, soldering of the pickup circuit is necessary. For details, see "1 05 LOADER ASSY of 7. DISASSEMBLY".
B
Joint Spring
� Pass through the guide shaft to a new 05SD Pickup Assy. � Attach it to the Traverse Mechanism Assy-S.
05SD Pickup Assy
C
Guide Shaft
� Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base and turn each screw to adjust the height. (Refer to "8.1.1 ADJUSTMENT ITEMS AND LOCATION".)
D
Joint
7.5mm Mechanism base
E
� Attach the Traverse Mechanism Assy-S to the 05 LOADER Assy. � Turn it over and attach the joint and the joint spring. � Arrange the flexible cables. (Refer to "7. DISASSEMBLY".)