PANASONIC WVCU650
Manual de Usuario

UNIT SELECTION
To control the system, you need to select a desired unit (system unit, recorder, monitor, or camera) at the beginning.

I Recorder Selection
Notes: � In advance, you need to set HDD-unit maps. (Refer to p. 78 Associating Recorder Numbers with Unit Numbers.) � In the factory default, Recorder 1 to 16 is associated with Unit 1 to 16. 1. Enter a recorder number by pressing numeric buttons. The entered number will appear on the LCD.

I System Unit Selection
Notes: � In advance, you need to set the unit number for each system unit. (Refer to the operating instructions of system units.) � 1 to 99 are available for the unit number. 1. Enter a unit number by pressing the numeric buttons. The entered number will appear on the LCD.

Mon02 Cam128 F1 F2 F3

____2 F4

Mon01 Cam016 F1 F2 F3

___16 F4

2. Press the RECORDER/UNIT button. The system will become ready for control, and the monitor number, camera number, and system unit number will appear on the LCD.

2. Press the RECORDER/UNIT button while holding down the SHIFT button. The system will become ready for control. Then, the monitor number, camera number, and system unit number will appear on the LCD.

Mon02 Cam016 Unit16 F1 F2 F3 F4
Notes: � Three seconds after, model number will appear in place of unit number.

Mon02 Cam016 F1 F2 F3

Unit16 F4

Note: Three seconds after, model number will appear in place of unit number. To display the unit number again, hold down the RECORDER/UNIT.

Mon02 Cam016 F1 F2 F3

HD316 F4

Mon02 Cam016 F1 F2 F3

HD316 F4

� If you have entered a wrong recorder number, �Invalid� will appear on the LCD. Then, the LCD will return to the status before the recording selection.

� If you have entered a wrong unit number, �Invalid� will appear on the LCD. Then, the LCD will return to the status before the system unit selection.

Invalid

Invalid

41