Panel Operations
In order to follow along with the instructions given here, you should start out by having Master switched ON (press the MASTER On/Off pedal and confirm that the MASTER ON/ OFF indicator has lighted). Also, press the Effects On/Off pedal to switch OFF effects (EFFECTS ON/OFF indicator extinguished).
fig.05
1. Select a tone.
You can select six different wave types with the TYPE knob.
2. Adjust the tone with
the COLOR knob. This knob adjusts the tone. The way in which it works will vary depending on the effect type selected.
5. Turn the MODE knob
to select one of eleven effect modes. This switches the DELAY and CHORUS settings.
3. Turn the LEVEL knob to
adjust the volume. Adjust this while switching the MASTER On/Off pedal so that the volume is roughly the same whether Master is on or off.
6. Turn the EFFECT LEVEL knob to
adjust the volume of the effect. If raising the effect level increases the overall volume too much, try reducing the volume with the LEVEL knob.
4. Press the Effects On/Off pedal to switch the
effects on (EFFECTS ON/OFF indicator is lit).
