DIGITECH WORKSTATIONFX
Manual de Usuario

Section Letter Step Number Program Number Step Insert/Delete
6.

Key or Chord Program Name Name Editor
Press the Insert softkey to add a new step to your section. This presents the Step Insert screen. In this screen you can choose a different chord root or key, harmony style and program for each step in this section. Turn the Data Wheel to select the program you want for this step. Select the chord root or key from the front panel keyboard and the harmony style from the softkeys

7.

Tip: You can simplify this step by selecting your chords on a MIDI keyboard and pressing the Step footswitch button to enter them. 8. Press the Right Arrow button to insert another event into your section. The number at the top left of the screen will increase by one. Since you have entered a program you like in the previous step, you only need to enter the chord root, key or harmony style. Press the Right Arrow button to enter new steps as they are required. If you make a mistake, it can be repaired in the Step Edit screen only (see below).

Note: Insert adds a new step before the current one shown on the screen. Delete removes the current step and replaces it with the one following.

9.

10. Press the Exit button to review your work in the Section Edit screen. Sing this part of your song and use the Arrow buttons or the footswitch to take you forward and back through the steps. If you have missed a chord, press Insert and add it as before. If you have more steps than you need or an incorrect entry, press the Delete softkey.

Editing Your Steps
If you would like to change something you entered in the Step Insert screen, this can be done in the Step Edit screen. This will allow you to modify chord root, harmony style, key and programs only. You cannot insert or delete events as you can in the Step Insert screen. It is helpful to know the section and step number before you enter the Step Edit screen. Advance through the steps in the Performance or Section Edit screens taking note of where your change will be required.

To modify a song step:
1. From the Arrangement screen, select the section you want to edit with the Arrow buttons. Press the Edit button. This presents the Step Insert screen. Press the Edit button again. This presents the Step Edit screen. Locate the step you want to change with the Arrow buttons. The step number at the top left of the LCD will show you where you are. 53

2. 3.