This set-up will enable you to:
� watch an unscrambled or scrambled channel while recording it. � record any channels through the cable box.
Cable Box
You will need to:
OUT
IN
� set TV channel 3 or 4 to receive video signals. (See page 11.) � set VCR channel to the output channel of the cable box, and select a desired cable channel on the cable box. � while the VCR is turned off or the �VCR� indicator is not lit in the VCR display, set TV channel to the output channel of the cable box.
A/B switch
A
A B
This set-up will enable you to:
� watch an unscrambled or scrambled channel while recording it. � record an unscrambled channel while watching another unscrambled channel (only when you connect a cable-compatible TV). � A/B switch �A�: record and watch an unscrambled channel which comes bypassing the cable box. � A/B switch �B�: record and watch a scrambled or unscrambled channel coming through the cable box.
B
Cable Box
PREPARATION
Cable Box
This set-up will enable you to:
� watch or record a channel through the cable box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
� press INPUT SELECT so that the VCR display shows �L1�.
