TOSHIBA W614S
Manual de Servicio

2-4
Press ENTER to start the �AUTO� clock
After the VCR is turned off, it automatically The language selection and clock setting must be set when VCR is first plugged in or after it by the local TV stations.
*The clock is
� Turn on TV, and select channel (3 4), or video input mode if you made the Audio/Video
CLOCK SET � Press VCR to set remote control operating the VCR. broadcasting

PREPARATION

Example: To set the clock to 2:30 p.m. on
updates clock using the data broadcast

8 Setting the Clock Initial Settings Using On-screen Display set feature.

Reference Information

August 25 (summer time) 2001.

encounters a power failure.

Preparation Press PROG..

1
and press ENTER. signal at 8:00 A.M TIME ZOnE CH

The MENU screen appears on the TV.
SUMMER TIME

connection (page 11). revised by

2 Select �PRESET� using FF or REW,
SCAnnInG nOW

Setting the Language every morning.

DISPLAY EJECT POWER

1 Press POWER to turn on the VCR.

VCR TV BOX

CLOCK SET

CABLE

POWER

CH/TRK

PREPARATION

1 2 3

Select the options using FF or REW.

VCR CH MEMORY Press PROG..

2 9

4 5 6

The following screen appears on TV. Change the data using PLAY or STOP.

TV VOL

7 8 9

I.SELECT TV/VCR

EnD : PROG ENTER

0 100

1) Set �SUMMER TIME (Daylight-Saving Time)�.

SP/LP REC TIMER

PLAY

REW Press ENTER to select �CLOCK SET�. DST start: Daylight-saving time begins on PLAY, STOP first Sunday in April. Because the
CLOCK SET PROG. DST end: Daylight-saving time ends on

3

REW FF

CURSOR

SLOW PAUSE / S T I L

clock automatically changes from 2:00 AM FF to 3:00 AM (forward one hour).
ENTER the last Sunday in October. The VCR
PRESS EnTER TO START SETTInG

STOP

PROG. CANCEL TV/VIDEO ENTER

A.SELECT COUNTER RESET

SUMMER TIME TIME ZOnE CH

3 Select the language using PLAY or
The screen turns to the MENU screen. AUTO: VCR is Select using �AUTO� the or clock �MANU� data using Broadcast by the local TV stations. PLAY or STOP. AUTO: The VCR automatically sets or IN: You want to use the DST function, and adjusts clock. you are leaving in the area that apply

REMAIN/ COUNT

clock automatically changes from 2:00 AM

STOP and press PROG. MEnU to 1:00 AM (back one hour).

remember that any part of a scheduled

Timer Recording that falls between these two times will not be recorded.

4

4 Press PROG. return the normal TV screen. If you select �AUTO� mode, proceed to step 8. Daylight-saving time.
step. want to use DST function.

OUT: are not leaving in area that MANU: You can set the clock manually. apply Daylight-saving time and you do not If you select �MANU� mode, proceed to next

Optional settings on the SET UP screen

5 Vary digits to set the hour. If you select �AUTO� for your time zone,
PLAY : To increase. VCR sets clock using the first

2) Set �TIME ZONE�.

Other optional settings can be made. Press ENTER while �SET UP� is selected on the MENU screen. STOP : To decrease. Coordinated Universal Time information it The screen turns to the SET UP screen. finds. If the time is not correct, select

6 Move to the next using FF another time zone or use the �MANU�
(To move back, press REW.) option.

TAPE LEnGTH

3) Set �CLOCK DATA CH�. 120 160 180 Page 22 two digits).
Proceed step 10 to start the clock. If AUTO CLOCK SET is unsuccessful, set the set menu selection.

If you don't know clock data channel, Page 28 Repeat step 5 and 6 to set the minutes, select �AUTO�. The VCR will scan COUnTER MEM on off Page 23 month, day, and year (by the last automatically tune channel carrying LAnGUAGE EnG FRA ESP To change language, move down here and set to the desired one. the clock data. E n D : PROG

SAP SET on off

7

To exit, press PROG. once. time and date through the �MANU� clock

Press PROG.. 10
Now the clock starts.

14 15

Toshiba