TOSHIBA W612C
Manual de Servicio

2-10
Timer Program Recording (continued) the timer program recording
Press PROG. during timer recording mode. � When a power failure has occurred, �--:--�

Reference Information

Confirming the timer programs If a power failure occurs during

The Move to the next using FF, and set screen for confirming will appear. appears in VCR display. Since the programmed contents have been cleared, reset the clock and timer programming.
P M

the recording date using PLAY or STOP.
� When power has failed for a short time, the� color of the current time display blinks. The programmed contents are not affected. Reset the clock.

5

The date changes as follows:

8/25 9/25 7/25 WKLYSU � MO~FR WKLYSA �

[WKLYSU] � [WKLYSA]: You can record TV programs on the same channel on the day and time every week. [MO~FR]: You can record TV programs same channel on the day and time Monday through Friday. Press PROG. again to exit from confirmation page. Overlaps of the programs If two timer programs overlap, the recording
P

Move to the next using FF, and set 6 start time of program 1 has Changing/cancelling priority the over timer the hour and minutes of the recording off time of program2. recording start time.
1) If the indicator is lit , press both TIMER to it off and then turn the VCR on by pressing VCR POWER. Program 2 2) With steps 2 to 9, change the items. Overlapped portion To cancel a program, select the program you (not recorded)
Program 1 (Start time)

RECORDING

M

programs

(Start time)

Move to next, and set the 7 want to cancel in step 4, and press CANCEL. recording off time. The line is then cleared.
3) Press both TIMER return to the timer standby mode .

Error indication
The �--E--� ( Error ) indicator appears in the VCR display if you press both TIMER when:

�� Move a to cassette next, is and not select loaded. the �� the loaded cassette has no safety tab. �� timer recording is in progress. In these cases, a recording can not be made.

tape speed (SP) using PLAY or STOP.

8

For the tape speed �AUTO (Auto Speed Select)�, see below. To set another program, press FF, and select the next line pressing STOP. To cancel the Timer Recording Repeat steps 4 to 8. By pressing POWER button on the front

Press PROG.. panel of VCR, it will cancel the timer 9
REC TIMER

Now programming is completed. recording and go to standby.

10 Press both TIMER simultaneously.
TIMER Hi-Fi

The power turns off and the VCR enters
STEREO
L SAP

the timer standby mode.
� Make sure that the tape length is selected correctly

Auto Speed Select Notes

If you are not sure the tape is long enough for according to tape used on the SET UP screen timer program recording in the SP tape speed, (page 22). set the recording tape speed to �AUTO�. � When SLP speed is selected and the tape Recording starts in SP tape speed and length is not sufficient record program to the VCR automatically selects tape speed end, program cannot be recorded to the end.
� The picture will be distorted when playing the part record program to end. If the tape length SP to SLP with the Auto Speed Select feature. changes from SP to SLP.

is not long enough, the tape speed automatically where the recording tape speed is switched from

26 27

Toshiba