HITACHI VTMX410E
Manual de Servicio

A (S-1) [1] (S-1)

[3] [4] (L-1)

(L-3) [5] (S-1A) [6] (P-1) B (L-2)

Installation of [3] and [6]
First, insert [6] diagonally in [3] as shown below. Then, install [6] in [3] while pushing (L-1) in a direction of arrow. After installing [6] in [3], confirm that pin A of [3]

Fig. DM3H

enters hole A of [6] properly. [3]

Pin D Pin C [2] A 1 2 Pull up Slide View for A

1 (L-1) 2 [6] Hole A Pin A

Installation of [4] and [6]
Install [6] in [4] while pulling (L-2) in a direction of arrow. After installing [6] in [4], confirm that pin B of [4] enters hole B of [6] properly.

Pin A

[4] Pin B Slot A View for B Hole B Pin B (L-2) [6]

Slots B

Fig. DM5H

Slot A First, while pushing the locking tab as shown in the right, slide and pull up the right side on [2] to release Pin A and Pin B from the slots A. Then, remove Pin C and Pin D on [2] from the slots B as shown. Locking tab View for A

Fig. DM4H

4-7