HITACHI VTFX665A
Manual de Servicio

10. REC button� Press for manual recording. IRT button� Press to activates Instant Recording Timer. (only on the VCR) 11. NUMBER buttons� Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press "0" button then 1 to 9. (only on the remote control) +100 button� When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press "+100" button then press "2" and "5"). (only on the remote control) ENTER- (only on the remote control) 12. TAPE SPEED button� Press to choose the desired recording speed : SP/SLP. (only on the remote control) 13. MENU button� Press to display the menu on the TV screen. Press to exit the menu on the TV screen. (only on the remote control) 14. DISPLAY button� Press to display the current time, channel number, real time tape counter, and other information on the TV screen. (only on the remote control) Each time you press this button, TV screen will change as shown. The status display (STOP, PLAY etc.) and the tape speed display (SP, LP (playback only), or SLP) will disappear after 5 seconds.
<OFF mode> <COUNT mode>
STOP

18. PAUSE button� Press to temporarily stop the tape during recording or to view a still picture during playback. (only on the remote control) Frame Advance function� Press to advance the picture by one frame at a time during the still mode. (only on the remote control) 19. SLOW button� Press to start slow motion playback. (only on the remote control) 20. MUTE button� Press to mute the TV�s sound. Press it again to resume the sound. (only on the remote control) 21. VOL(ume) buttons� Press to adjust the desired TV�s volume level by using either v or w button. (only on the remote control) 22. VCR/TV button� Press to select TV or VCR mode. (only on the remote control) VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner. TV position: to watch TV or to view one program while recording another. 23. MODE SELECT buttons (only on the remote control) CATV button TV button VCR button 24. Power cord� Connect to a standard AC outlet (120V/60Hz). 25. AUDIO OUT jacks� Connect to the audio input jacks of your audio equipment or another VCR. 26. AUDIO IN jacks� Connect to the audio output jacks of your audio equipment or another VCR. 27. ANT. IN terminal� Connect to an antenna, Cable system or Satellite system. 28. VIDEO OUT jack� Connect to the video input jack of your video camera or another VCR. 29. VIDEO IN jack� Connect to the video output jack of your video camera or another VCR. 30. CH3/CH4 selector switch� Use to select a video output channel (3 or 4) for VCR playback. 31. ANT. OUT terminal� Connects to the antenna input terminal on your TV.

<CLOCK mode>
STOP 5:40PM CH 02

Press once

SP

0:12:34

Press once

SP

Press once

15. COUNTER RESET button� Press to reset counter to 0:00:00. (only on the remote control) EXIT button� Press to exit the menu on the TV screen. (only on the remote control) 16. COUNTER MEMORY button� Press to set counter memory on and off. (only on the remote control) 17. SEARCH MODE button� Press to perform a Time Search or an Index Search. (only on the remote control)

1-5-2