PIONEER VSX-D812-K/KUXJICA
Manual de Servicio

1

2

3

4

Display
A

1

2

3

4

5

6

7

8

9

10

B

11 12
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on. SB Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected.
D

13

14

15

16

7 DIRECT Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 8 MIDNIGHT Lights during Midnight listening. 9 SLEEP Lights when the receiver is in sleep mode. 10 Speaker indicator Shows the speaker system currently in use. 11 Character display 12 Neo:6 When the (STANDARD) NEO:6 mode of the receiver is on, this lights to indicate NEO:6 processing. 13 ADV.SURR. (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 14 LOUDNESS Lights when LOUDNESShas been selected. 15 TUNER indicators STEREO Lights when a stereo FM broadcast is being received in auto stereo mode. MONO Lights when the mono mode is set using the MPX button. TUNED Lights when a broadcast is being received. 16 Master volume level Shows the overall volume level.---dB indicates the minimum level, and - 0 dB indicates the maximum level. Depending on your level settings for each channel, the maximum volume can range between �10 dB and �0 dB.

C

DTS Lights when a source with DTS encoded audio signals is detected. 2 DTS When the STANDARD mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the STANDARD mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.

E

4 2 PRO LOGIC II When the (STANDARD) Pro to indicate Pro of the receiver is on, this lights Logic II mode Logic II decoding. 5 VIR.SB Lights during Virtual surround back processing. 6 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.

F

90
1 2

VSX-D912-K
3 4