PIONEER VSX-D514-S/SFXJI
Manual de Servicio

5

6

7

8

Display
A

1

2

3

4

5

6

7

8

9

10

B

11

12

13

14

15

1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO : Lights when AUTO signal select is on . DIGITAL : Lights when a digital audio signal is detected. 2 DIGITAL : Lights when a Dolby Digital signal is detected. ANALOG : Lights when an analog signal is detected. DTS : Lights when a source with DTS audio signal is detected. SB : Lights when a source (such as DTS-ES and Dolby Digital EX) with surround back channel information is detected. 2 When the Standard mode of the receiver is on , this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on , this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding. 5 VIR.SB Lights during Virtual surround back processing. 6 DIRECT Lights when source direct playback is selected. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.

7 MIDNIGHT Lights during Midnight listening. 8 SLEEP Lights when the receiver is in sleep mode. 9 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal). 10 Speaker indicator

C

Shows if the speaker system is on or not. SP 3 A means speakers are switched on. SP 3 means the headphones are connected. 11 Character display
D

12 ADV. SURR. (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected. 13 LOUDNESS Lights during Loudness listening. 14 TUNER indicators STEREO Lights when a stereo FM broadcast is : being received in auto stereo mode. MONO : Lights when the mono mode is set using the MPX button. TUNED : Lights when a broadcast is being received. 15 Master volume level Shows the overall volume level. dB indicates --the minimum level, and � 0dB indicates the maximum level.

E

Depending on the level settings you make for each channel, the maximum level can range between �10dB and � 0dB.

F

VSX-D514-K
5 6 7 8

89