With the VCR on and in VCR position (the VCR light will appear on the display panel), press the VCR button, then press the MENU button.
Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B button.
REW
PLAY
STOP
STATUS/EXIT
F.FWD
3 4
1
MENU
CLEAR
4 5
1
2 5 8 0
TV
3
CH.
Press the PLAY/o button or the STOP/p button to select PROGRAM REVIEW, then press the F.FWD/B button. The timer recording information for the program in the lowest numbered slot will appear on-screen. If no timer recordings are set, nothing will happen when you press the F.FWD/B button.
4 7
MUTE
VCR
6 9
+100
CBL/DBS
VOL.
VAR.SLOW
VCR PLUS+ /ENTER
SLOW
Press the F.FWD/B button repeatedly to review all programmed timer recordings. If you don�t press the F.FWD/B button within 10 seconds, the VCR will automatically display information about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.
TRACKING
F.ADV
X2 PLAY
QUICK
TIME
INDEX REC END SEARCH
SKIP
5 6
To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
Helpful Hints
� CLASH may flash on-screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap. The current timer recording will not take place. You may choose to cancel the overlapping timer recording. � If the preset time for a timer recording comes up during a OneTouch Recording, the OTR has priority. � To stop a started timer recording, press the STOP/EJECT button on the VCR. � If the power fails for more than one minute, programmed timer recordings will be lost. Reset the clock before resetting the timer recordings. See page 58 for more hints.
Repeat steps 1 - 4 to make sure you have cleared the correct timer recording.
