PHILIPS VRA471AT
Manual de Usuario

Automatic Operation Features 45
The following playback features will always operate.

Automatic Playback
When you put a tape in the VCR, the power will come on automatically. If the tape�s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the VCR power is off, the VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape, stop, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind the tape to the point at which the counter is set to zero, then stop. The VCR will not eject the tape automatically or shut itself off.

Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). If a timer recording is set, a tape can only be ejected with the power on. Make sure you insert a tape and turn off the VCR power for the timer recording.

Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking
To manually adjust the tracking during playback and slow motion playback, press the CHANNEL o/p buttons on the VCR or the TRACKING o/p button on the remote control. Tracking will return to Automatic Tracking Adjustment when you press the STOP/p button or insert a tape. You cannot manually adjust the tracking of a Still picture. However, you may press the CHANNEL o/p buttons on the VCR or the TRACKING o/p button on the remote control to remove vertical jitter in a Still picture.

Before Tracking Adjustment

After Tracking Adjustment