KENWOOD VR-905-S
Manual de Servicio

KRF-V5090D/V6090D/VR-905/906
ACCESSORIES / CAUTIONS
Accessories
FM indoor antenna (1) (T90-0855-05): YXE (T90-0905-05): KP AM loop antenna (1) (T90-0893-05) Remote control unit (1) RC-R0630/R0630E (A70-1669-05): KPY (A70-1670-05): EX *AC plug adapter (1) (E03-0508-05)

Batteries (R03/AAA) (2)

*Use to adapter the plug on the power cord to the sape of the wall outlet. (Accessory only for regions where use is necessary.)

MODEL vs UNIT

MODEL VR-906/-S VR-906/-S KRF-V6090D KRF-V6090D-S KRF-V6090D/D-S VR-905-S VR-905/-S KRF-V5090D/D-S KRF-V5090D-S KRF-V5090D/D-S K P Y X E K P Y X E

SURROUND
X08-3420-10 X08-3422-91 X08-3420-11 X08-3420-10 X08-3422-92 X08-3420-10

AUDIO
X09-6970-10 X09-6972-91 X09-6970-71 X09-6972-71 X09-6970-11 X09-6972-92 X09-6970-72 X09-6972-72

DISPLAY
X14-7930-10

ELECTRIC

X14-7932-91 X25-6730-10 X14-7930-71 X14-7932-71 X14-7930-11 -

X14-7932-92 X25-6730-10 X14-7930-72 X14-7932-72 -

Cautions
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. � Please note that resetting the microcomputer will clear the contents of the memory and return the unit to the state it was in when it left the factory.

For the U.S.A. and Canada Unplug the power cord from the wall outlet, then plug it back in while holding down the POWER ON/STANDBY key. For other countries With the power cord plugged in, turn the POWER ON/ OFF key OFF. Then, while holding down the ON/STANDBY key, press POWER ON/OFF key.

2