30 Recording
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
1 2 6
Turn on the TV. Insert a tape in the VCR.
2
Insert a tape with its record tab intact in the VCR.
EJECT POWER MENU STATUS/EXIT CLEAR
1 4 7
MEMORY REC /OTR
2 5 8 0
PLAY
3 6 9
PAUSE /STILL ALT.CH
3
Press the VCR button.
4 5 6 7 8
If the VCR light appears on the display panel, go to step 5. If the VCR light does not appear, press the VCR/TV button once.
REW
F.FWD
STOP
8 7 9 5
CH. MUTE VCR/TV VCR
VOL.
Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 35.)
3 4
SPEED TIME SEARCH TV CBL/DBS ENTER SLOW
Use the CH(annel) o/p buttons or the Number buttons to select the channel to be recorded.
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear on the VCR display panel.
Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 31-37. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
