l Switch off the TV set l Remove the jack of the aerial cable from the back of the TV set and insert it in the aerial socket 2 of the video recorder
2 AERIAL E
CABLE
2 (ENCLOSED)
l Connect the aerial socket of the TV set with the TV socket 3 of the Video recorder
4
3
2
1
3 SCART
CABLE (IF THE
TV
SET HAS A SCART SOCKET)
l Connect the scart socket of the TV set with the scart socket AV1 EXT1 of the video recorder
4
AV1 EXT1
4 MAINS
CABLES (SUPPLIED )
l Connect the mains socket 4 of the video recorder with a mains socket
C
ADJUSTING THE TV
SET
HAVE YOU CONNECTED A SCART CABLE?
YES
l Your set should automatically switch over to the programme number allocated to video recorder operation. If it does not, select the corresponding programme number manually (EXT, AV, 0, . . .)
NO
l Switch on the TV set and on the TV set select the programme number to be used for video recorder operation
4
8
AUTO INSTALL
l You will see the welcome screen (�CONGRATULATIONS. YOU NOW OWN A NEW PHILIPS
VIDEO RECORDER�)
l On the TV set the setting for this programme number changes until the welcome screen (�CONGRATULATIONS. YOU NOW OWN A NEW PHILIPS VIDEO RECORDER�) is shown
D
SETTING
CHANNEL, DATE AND TIME
l Start the automatic initial installation with the OK button (on the remote control) l The video recorder automatically searches for all available TV channels.This may take several minutes l The screen shows the message �STORED�. The initial setting is now complete.
SEARCHING 00 TV CHANNELS FOUND hhhh_______________
