SONY VPL-X1000E
Manual de Servicio

1-26 VPL-X1000E, VPL-X1000M, VPL-X1000U
Precautions

Overview
This manual describes how to install the Sony LCD Data Projector VPLX600U/E/M, VPL-S600U/E/M, VPL-X1000U/E/M and VPL-S900U/E/M, how to replace the lens, how to change the lens position for rear projection (optical axis angle: 0 degree), and installation diagrams. When you replace the lens or change the lens position, also refer to the Operating Instructions.

On illumination
� To obtain the best picture, the front of the screen should not be exposed to direct lighting or sunlight. � Ceiling-mounted spot lighting is recommended. Use a cover over fluorescent lamps to avoid lowering the contrast ratio. � Cover any windows that face the screen with opaque draperies. � It is desirable to install the projector in a room where floor and walls are not of light-reflecting material. If the floor and walls are of reflecting material, it is recommended that the carpet and wall paper be changed to a dark color.

On preventing internal heat build-up
� After you turn off the power with the I / u key on the control panel or on the Remote Commander, do not disconnect the unit from the wall outlet while the cooling fan is still running. � Do not disconnect the AC power cord from the wall outlet while the fan is still running. Caution The projector is equipped with ventilation holes (intake) at the bottom and ventilation holes (exhaust) at the front. Do not block or place anything near these holes, or internal heat build-up may occur, causing picture degradation or damage to the projector.

On cleaning
� To keep the cabinet looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents, such as thinner, benzene, or abrasive cleansers, since these will damage the cabinet. � Avoid touching the lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution, or thinner. � Clean the filter at regular intervals.

On repacking
� Save the original shipping carton and packing material; they will come in handy if you ever have to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory.

4 (EN)

5 (EN)