Operations (Step 4 Setting with V.Networks Controller)
Starting Up V.Networks Controller
With the installed Controller, camera images can be monitored. The settings for recording, replay and frame rate etc. can also be performed.
1. Select [Start], [Programs], [V.NETWORKS] and then
[V.Networks Controller].
[vn-c10u Controller] to start up
In the pull down menu, select the camera to connect. Caution After the power for VN-C10 is turned on, there will be about 20 seconds until VN-C10 becomes ready to be connected with the PC. This is not a defect.
Live images from the camera are displayed.
Note � If a password has been set, enter the correct password. � This [Controller] can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (only for JPEG), VNA1 and VN-C10.
